RAID-3: What is it good for?

By  Rick Cook

SearchStorage.com

What you will learn from this tip: You don't hear much about RAID-3, but it has its uses. Find out when to use RAID-3 and why.


RAID-3 is one of the lesser RAID levels. While it isn't as obscure as RAID-4, or proprietary, like RAID-7, RAID-3 is seldom used. Also, some writers have gone so far as to declare RAID-3 inferior to RAID-5 in all applications.

This isn't quite true. While RAID-3 has some serious drawbacks for general storage applications, it offers a fast, efficient method of storage in some specialized areas.

RAID-3 combines striping and parity, but it puts all the parity information on a separate parity disk. The result is an array that is especially poor at random writes and only so-so on random reads. This means RAID-3 is poorly suited for transactional applications.

Where RAID-3 shines is in sequential reads and, to a lesser extent, in sequential writes. In fact, it's actually faster than RAID-5 on sequential reads and writes, and nearly as fast as RAID-0 (striping), with the advantage of data protection. This means that in applications where large files comprise all of the workload, RAID-3 is a good choice.

Not surprisingly, RAID-3 is most common in applications like streaming media, graphics and video editing, in which the files are very large and the storage medium must keep up with system speed.

A RAID-3 array tolerates the loss of any single drive and most modern RAID-3 systems support hot spares and automatic rebuilding. While performance doesn't degrade much in the event of a single-disk failure, rebuilding the array can take hours, as the blocks are checked and the bad ones reconstructed.

RAID-3 requires at least three disks (two for data and one for parity) and at least a medium level controller.

Generally speaking, any application that reads and writes large files sequentially is a good candidate for RAID-3.

For more information:

Tip: RAID-50 -- RAID-5 with suspenders

Topics: RAID technology

Tip: RAID-10: Two great RAIDs that go great together


About the author: Rick Cook has been writing about mass storage since the days when the term meant an 80 K floppy disk. The computers he learned on used ferrite cores and magnetic drums. For the last twenty years, he has been a freelance writer specializing in storage and other computer issues.

08 Apr 2005

Disclaimer: Our Tips Exchange is a forum for you to share technical advice and expertise with your peers and to learn from other enterprise IT professionals. TechTarget provides the infrastructure to facilitate this sharing of information. However, we cannot guarantee the accuracy or validity of the material submitted. You agree that your use of the Ask The Expert services and your reliance on any questions, answers, information or other materials received through this Web site is at your own risk.