Enterprise-class RAID features like "N-way mirroring" and "controller spanning" are entering the small-to-medium sized (SMB) market, riding on the coat tails of low-cost serial ATA storage technology. This month's column explains these less familiar enterprise-class RAID features, starting with a set of features that ensure system uptime and flexibility.
Hot swapping, online capacity expansion and online raid level migration
Several advanced RAID features are commonly used in conjunction with one another. For example, hot swapping, online capacity expansion (OCE) and online RAID level migration (ORLM), when used together, allow major alterations to the storage system without taking the system offline.
This ability to modify the storage system without interrupting operations is particularly useful to dynamic organizations. As an example, let's look at a small but growing organization with a transaction processing (TP) application. When the organization is new, business-critical data could be protected with a simple RAID1 array that mirrors the data across two disks. As the business grows and the level of transactions increases, it will need more disk capacity, despite the fact that budgets will still be tight. In this scenario, RAID5 is appealing since overall data capacity could be doubled by only adding a single, third disk. However, the TP server cannot be offline for any significant amount of time, so hot swapping, OCE and ORLM will be required. Hot swapping allows the third disk to be added; capacity expansion allows the existing RAID1 array to be expanded to include the third disk; and RAID level migration enables the transformation of the RAID1 array to a RAID5 array. All of this is performed in the background, invisible to each user, without losing a single business transaction.
If our small company continues to expand, transaction processing I/O performance will eventually need a boost and the IT group will have to add and maintain another disk or two. In this case, RAID10 with its fast random reads and writes will be desirable. Again, the admin will have to add at least one disk and transform the array from RAID5 to RAID10 without taking the system down. Once again, hot swapping, OCE and ORLM are required to migrate to RAID10.
Read part 2 of this tip to learn about N-way mirroring, drive roaming and more.
About the author: Randy Arnott is a RAID architect at Broadcom specializing in software for embedded, card-based, and host-based RAID solutions. He has over 25 years of experience as both a hardware and software engineer with established storage companies like DEC, EMC, and Adaptec, as well as with two successful startups, Data Kinesis and RAIDCore, recently acquired by Broadcom Corporation.