|
You will get the fastest performance by using RAID-0 although you will not be able to survive a drive failure with that RAID type. Your use of RAID-0+1 is probably the better approach. Depending on the number of disks in the array, the controllers in the MSA 1000 default to ADG (advanced data guard), so make sure ADG is disabled.
The MSA1000 install guide states that for best performance when using RAID0+1, it is best to stripe ACROSS buses. From the manual: "For example, because drive bays 1-7 in the MSA1000 are located on bus 1 and bays 8-14 are located on bus 2, when creating a mirrored array with six drives, include the drives in bays 1, 2, 3 and 8, 9, 10."
One other thing you could do is to use a volume manager on the server to create a volume that includes LUNs from multiple RAID groups. Doing so will allow you to spread the I/O load across as many spindles as possible, from multiple shelves if you have them.
Chris
The views and opinions expressed by Christopher L. Poelker are his alone and not necessarily shared by Hitachi Data Systems.
Editor's note: Do you agree with this expert's response? If you have more to share, post it in one of our discussion forums.
|
